Telnet To An Ip Trunk Card Through The Otm Pc - Nortel 1000 Description, Installation And Operation Manual

Page 488 of 644

Telnet to an IP trunk card through the OTM PC

553-3001-363 Standard 2.00
OA&M using the ITG shell CLI and overlays
2 Use the following communication parameters for the TTY terminal
emulation on the PC:
• 9600 baud
• 8 bits
• no parity bit
• one stop bit
3 When prompted to login, enter current username and password. Default
is:
VxWorks login: itgadmin
Password: itgadmin
ITG>
Only one person can use the ITG shell at a time. Any session, local or Telnet,
can be overridden by a second session. The second user receives a warning
before the login and must confirm to complete the login. There is a 20-minute
Telnet shell activity time-out limit.
Follow the steps in Procedure 62 to Telnet to an IP trunk card through the
OTM PC.
Procedure 62
Telnetting to an IP trunk card through the OTM PC
1 In the OTM Navigator window select the IP Telephony Gateway icon
from the Services folder.
2 Select a card from the lower portion of the window. Click the right mouse
button. Select Telnet to ITG card (see Figure 146 on
opens a Telnet window and automatically connects to the IP trunk card by
using the card management IP address.
September 2004
End of Procedure
page 489). The PC