Nortel 1000 Description, Installation And Operation Manual page 534

Page 534 of 644
Table 61
File transfer commands (Part 2 of 3)
Command
Example:
SNMPConfFileGet
hostname, username,
password, directory path,
filename
Example:
hostFileGet hostname,
username, password,
directory path, filename,
ITGFileName, listener
Example:
currOmFilePut hostname,
username, password,
directory path, filename
Example:
prevOmFilePut hostname,
username, password,
directory path, filename
Example:
553-3001-363 Standard 2.00
Maintenance
Description
ITG> bootpFileGet "ngals042", "anonymous", "guest",
"/bootpDir", "bootptab"
Update the SNMP configuration file on the IP trunk card with the
SNMP configuration file on the indicated host, account and
path. The SNMPConfFileGet task on the host starts an FTP
session with the given parameters and downloads the file to
flash file system.
ITG> SNMPConfFileGet "ngals042", "anonymous", "guest",
"/snmpDir", "agent.cnf"
Get any file from the host and does a get through FTP to the IP
trunk card.
Note: ITGFileName is the full path and filename of where the
file is to be placed. The listener parameter indicates which
module to inform of the successful file transfer. It can be set to
-1 to be disabled.
ITG> hostFileGet "ngals042", "anonymous", "guest",
"/hostfileDir", "hostFile.txt", "/C:ITGFILEDIR/ITGFILE.TXT", -1
The omFilePut task on the host starts an FTP session with the
given parameters and downloads the IP trunk card's current
Operational Measurements file to the indicated location on the
host.
ITG> currOmFilePut "ngals042", "anonymous", "guest",
"/currDir", "omFile"
The omFilePut task on the host starts an FTP session with the
given parameters and downloads the IP trunk card's previous
Operational Measurements file to the indicated location on the
host.
ITG> prevOmFilePut "ngals042", "anonymous", "guest",
"/prevDir", "omFile"
September 2004