Provision The Ip Trunk Cards - Nortel 1000 Description, Installation And Operation Manual

Page 402 of 644

Provision the IP trunk cards

Figure 95
New ITG Node - Configuration tab
553-3001-363 Standard 2.00
Provisioning IP Trunk 3.01 (and later) in OTM 2.1 (and later)
9 Click the Configuration tab. This is where the IP trunk cards are
provisioned. See Figure 95.
A minimum of one IP trunk card, Leader 0, must be defined. This card acts
as the leader card on startup and remains as leader until it suffers some
sort of failure that would require changeover to the Backup Leader card.
Note: OTM 2.1 (and later) requires that the second card that is
provisioned be configured as Leader 1 (Backup Leader). Leader 1 must
be configured before any Follower cards are provisioned.
September 2004