Internet Telephone Installer Password Ipl> Commands - Nortel Succession 1000 Installation And Configuration Manual

Internet Telephone Installer Password IPL> commands
Table 13
Internet Telephone Installer Password commands (Part 1 of 3)
IPL> command
nodePwdEnable
nodePwdDisable
nodePwdShow
nodeTempPwdClear
clearLockout
<TN | IP>
Command line interface (CLI) commands
Table 13 lists the Internet Telephone Installer Password IPL> commands.
These commands must be entered at the vxWorks
Description
Enables the administrative Internet Telephone
Installer Password setting. After this command is
entered, all Internet Telephones registering display
the password screen.
Disables both the administrative and the temporary
Internet Telephone Installer Password settings.
After this command is entered, all Internet
Telephones display the original Node ID and TN
screen during registration.
Displays the settings of the Internet Telephone
Installer Password. The command displays the
current password, the state of password entry
(enable/disable), the temporary password, and the
number of uses and time to expiry.
Deletes the temporary Internet Telephone Installer
Password. It also resets the uses and time
parameters to zero.
Clears the lockout at the TPS for a particular
Internet Telephone resulting from three
consecutive failed attempts to enter either the
Internet Telephone Installer Password or the
Temporary Internet Installer Password.
Signaling Server Installation and Configuration
Page 93 of 116
TM
shell.
Element
Manager
!
!
!