Nortel 1000 Description, Installation And Operation Manual page 637

Appendix G: Upgrade an ITG Trunk 1.0 node to support ISDN signaling trunks
Procedure 87
Upgrading software using the ITG shell
1 Prepare the OTM ITG FTP server to find the software image file when it
is requested from the ITG card BIOS shell using the upgrade or
swDownload command.
2 Select Synchronize > Transmit from the OTM ITG ISDN IP Trunk
application Configuration menu.
3 Check the box for Card Software. Browse for the software image file on
the OTM PC. When the software image file is found, open it from the
Browser so the path and file name appear in the OTM ITG Transmit
window.
4 Leave the radio button default setting of Transmit to selected nodes.
Check the Node Properties, Card Properties and Dialing Plan check
boxes.
5 Click the Start Transmit button.
Monitor progress in the Transmit Control window. Confirm that the
Node Properties, Card Properties and Dialing Plan are transmitted
successfully to the Leader 0 ITG trunk card TN. At this point, it is
normal for transmission to Leader 1 and Follower cards to fail.
6 When the transmission is complete, click the Close button.
7 Reboot the Leader 0 ITG trunk card.
End of Procedure
IP Trunk Description, Installation, and Operation
Page 637 of 644