Nortel 1000 Description, Installation And Operation Manual page 462

Page 462 of 644
553-3001-363 Standard 2.00
OTM 2.1 (and later) OA&M using OTM 2.1 (and later) applications
• Use the Open log file, Open trace file, and the Open OM file buttons
to view the related files. These files are transferred from the card using
FTP and displayed in Microsoft WordPad on the PC.
• The trace file is for expert level debugging (trace must be turned on
through the command line).
• The log file contains error messages.
• The OM file contains the current Operational Measurements.
• Setting the node time is required during initial node installation. OTM
sets the Leader card's time. The Leader sets the time on all other cards.
Set date and time for the IP Trunk 3.01 (and later) node
Set the date and time on the IP Trunk 3.01 (and later) node in order to have
correct time and date stamps in Operational Measurement (OM) reports,
RADIUS Call Accounting reports, error messages and error and trace logs.
Follow the steps in Procedure 55 to set the date and time.
Procedure 55
Setting the date and time
1 Select the IP Trunk 3.01 (and later) node for which the time and date is to
be set from the list in the upper part of the window.
2 Double-click Leader 0 from the list in the lower part of the window.
The ITG Card Properties Maintenance tab appears.
3 click the Set Node Time button. The Set Node Time dialog box appears.
4 Set the correct date and time.
5 Click OK. The clock is updated immediately on the Active Leader card
(Leader 0 or Leader 1), which in turn updates the other cards in the
ITG ISL Trunk node.
September 2004
End of Procedure