Nortel 1000 Description, Installation And Operation Manual page 500

Page 500 of 644
553-3001-363 Standard 2.00
OA&M using the ITG shell CLI and overlays
Software upgrade
Use this command in the procedure "Transmit new software to the IP trunk
cards" on page 360.
swDownload "hostname","username", "password",
"directory path", "filename"
Generic file transfer:
Use the generic file transfer commands below for debug purposes. The first
five parameters refer to the FTP host. The "ITGFileName" parameter refers
to the directory path and file name on the IP trunk card. The "listener"
parameter in the "hostFileGet" command identifies a software module to be
called to parse the file after it has been correctly transferred to the IP trunk
card. To avoid damaging the configuration files and the IP trunk card, only
use the "hostFileGet" command under the direction of Nortel Networks
support personnel.
hostFileGet "hostname","username","password",
"directory path","filename","ITGFileName","listener"
hostFilePut "hostname","username","password",
"directory path","filename","ITGFileName"
September 2004