Install Filter And Ntnd26 Cable (For Msdl And Dchip Cards In Different Large System Equipment Rows) - Nortel 1000 Description, Installation And Operation Manual

Page 270 of 644
Figure 39
NTND26 cable routing diagram
Power
Supply
Install filter and NTND26 cable (for MSDL and DCHIP
cards in different Large System equipment rows)
553-3001-363 Standard 2.00
Install and configure IP Trunk 3.01 (and later) node
ITG
Card
MSDL NTND26AA
Card Cable
5 Connect the DCH (P5) connector of the NTCW84KA to the outward side
of the 15-pin I/O panel filter connector.
Follow the steps in Procedure 12 on
NTND26 cable for MSDL and DCHIP cards in different Large System
equipment rows.
September 2004
XNET Network Shelf
Routing Channel
End of Procedure
page 271
Cable Channel
Cover Bracket
553-IPT0011
to install the filter and