OTM 2.1 (and later) OA&M using OTM 2.1 (and later) applications
Table 51
LD 32 – IP Trunk 3.01 (and later) maintenance commands (Part 2 of 2)
Command
STAT l s c
STAT l s c u
Disable the indicated IP trunk card
To disable the indicated IP trunk card in LD 32, use the following command:
DISC l s c
Disable the indicated IP trunk card when idle
To disable the indicated IP trunk card when idle in LD 32, use the following
command:
DISI l s c
Description
Print the system software status of
the indicated card.
where: l = loop, s = shelf, c = card
Print the system software status of
the indicated unit,
where: l = loop, s = shelf, c = card,
u = unit
Disable the indicated IP trunk card,
where: l = loop, s = shelf,
c = card
Disable the indicated IP trunk card
when idle, where: l = loop,
s = shelf, c = card
IP Trunk
Description, Installation, and Operation
Page 481 of 644