Rs-232 Maintenance Port; Ntmf29Ba Dchip Cable - Nortel 1000 Description, Installation And Operation Manual

Page 280 of 644

RS-232 maintenance port

NTMF29BA DCHIP cable

553-3001-363 Standard 2.00
Install and configure IP Trunk 3.01 (and later) node
The RS-232 maintenance port provides access to the Media Card 32-port
trunk card command prompt for monitoring and maintenance purposes, such
as upgrades and debugging. This port is available at the 9-pin connector on
the ITG Card Adapter ELAN/TLAN (L-adapter) subnet and at the mini-DIN
socket on the faceplate.
The serial port settings are as follows:
• 9600 baud
• 8 data bits
• 1 stop bit, no parity
• no flow control
The NTMF29BA DCHIP cable connects to port 0 of the DCHIP PC Card and
the MSDL/SDI DCHIP cable.
Note: Port 1 on the DCHIP PC Card is not used.
The DCHIP PC Card, which connects to NTMF04BA and NTND26AA
Cable, is keyed to allow insertion only in the correct direction. Refer to
Figure 45 on page 281.
September 2004