Change An Existing System - Nortel 1000 Description, Installation And Operation Manual

Provisioning IP Trunk 3.01 (and later) in OTM 2.1 (and later)
12 Click OK in the System Properties window.
The window closes and the OTM Navigator window is displayed.

Change an existing system

Follow the steps in Procedure 44 to make changes to an existing system.
Procedure 44
Changing an existing system
1 Log in to the OTM Navigator.
The window displays two sections – Services and Sites. See Figure 67 on
page
2 In the Site where the system is located, click the system to be changed.
3 Right-click the system and from the drop-down list, select Properties.
Alternatively, from the upper menu, click File > Properties.
The System Properties window opens. See Figure 85 on
End of Procedure
371.
IP Trunk Description, Installation, and Operation
Page 391 of 644
page 392.