Nortel 1000 Description, Installation And Operation Manual page 466

Page 466 of 644
Figure 140
ITG Transmit Options window
553-3001-363 Standard 2.00
OTM 2.1 (and later) OA&M using OTM 2.1 (and later) applications
The following comments apply to the ITG Transmit Options:
• To transmit Node Properties (BOOTP.1), select the node in the top
window.
• Node Properties (BOOTP.1) can be transmitted while the IP trunk cards
are enabled, but do not take effect until all the IP trunk cards in the node
are rebooted.
September 2004