Nortel 1000 Description, Installation And Operation Manual page 381

Provisioning IP Trunk 3.01 (and later) in OTM 2.1 (and later)
Figure 76
New system – add a system by right-clicking
Procedure 43
Adding a system
1 There are two ways to add a new system in the OTM Navigator window,
as follows:
a. Right-click the new site. A menu appears, as shown in Figure 76.
Click Add System. The Add System window opens. See Figure 78
on page 383.
b. Alternatively, select the new site. From the menu bar, click
Configuration > Add System. See Figure 77 on
System window opens. See Figure 78 on
IP Trunk Description, Installation, and Operation
Page 381 of 644
page 382. The Add
page 383.