Feed Solenoid - Xerox Phaser 6128MFP Service Manual

Service Parts Disassembly

Feed Solenoid

PL3.1.98
8-34
1. Open the Front Cover.
2. Remove the Left Side Cover (page 8-17).
3. Remove the Outer Pole Cover (page 8-19).
4. Remove the Rear Cover (page 8-22).
5. Remove the Right Side Cover (page 8-23).
6. Remove the Top Cover (page 8-25).
7. Remove the Drive Clutch and Bearing Kit (page 8-35).
8. Remove the Feed Drive Assembly (page 8-37).
9. Release the Feed Gear Return Spring from the hook on the printer frame.
Leave the spring connected to the arm on the Feed Gear.
10. Push down on the Feed Lever and release the Feed Gear retainer hook to slide
the Feed Gear off the Feed Shaft.
11. Remove the Lever Spring from the printer.
12. Release the Feed Lever hook and slide the Feed Lever off the shaft.
Lever Spring
Feed Return Spring
13. Release the Feed Solenoid harness from the cable restraints on the frame.
14. Disconnnect P/J231. Allow the relay connector to remain with the printer side
of the harness.
s6128mfp-232
Phaser 6128MFP Service Manual