Service Parts Disassembly
Interlock Harness
PL10.6.4
8-52
1. Open the Front Cover.
2. Remove the Left Side Cover (page 8-17).
3. Remove the Outer Pole Cover (page 8-19).
4. Remove the Rear Cover (page 8-22).
5. Remove the Right Side Cover (page 8-23).
6. Remove the Top Cover (page 8-25).
7. Disconnect P/J44 on the LVPS, and release the harness from the clamp.
8. Remove the 3 clamps on the Duct Plate (PL10.6.1) that secure the harness,
then pull the harness through the hole.
P/J44
s6128mfp-196
s6128mfp-197
Phaser 6128MFP Service Manual