Skew - Xerox Phaser 6128MFP Service Manual

Skew

Phaser 6128MFP Service Manual
The printed image is not parallel with both sides of the paper.
Initial Actions
• Check the paper transfer path.
• Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Notes
Separator Roller Assembly
(PL2.1.5)
Feed Roller Assembly (PL3.2.4)
Registration Roller Assembly
(PL3.2.9)
Metal Registration Roller
(PL3.2.10)
Note
The Tray is recommended for paper feeding because paper fed via the Manual
Feed is prone to skew depending on how the sheet is placed on Manual Feed.
Troubleshooting Procedure Table
Step Actions and Questions
1 Inspect the paper being used.
Is it approved paper?
2 Is the image printed correctly?
3 Check the paper being used and its
condition.
Is the paper dry and recommended
paper?
4 Is the image printed correctly?
Print-Quality Troubleshooting
Example Print
Yes No
Go to step 3. Use paper that
is on the list of
papers
approved for
the printer,
then go to step
2.
Complete Go to step 3.
Go to step 5. Replace the
paper with a
new dry and
recommended
one, then go to
step 4.
Complete Go to step 5.
Skew 2
5-33