Xerox Phaser 6128MFP Service Manual page 151

Phaser 6128MFP Service Manual
Error Message Summary (continued)
System Error Message
Jam Reseat paper from
Manual Feed
Jam Jam at Front Cover
Open Front Cover and
Remove Paper
Jam Jam at Front Cover
Open Front Cover and
Remove Paper
Jam Jam at Exit
Open Front Cover and
Remove Paper
Jam Jam at Exit
Open Front Cover and
Remove Paper
Jam Jam at Exit
Open Front Cover and
Remove Paper
Jam Jam at Exit
Open Front Cover
Jam Jam at Reg. Roll
Open Front Cover
Media Load Tray
XXX(Paper Size)
Load Tray
YYY(Paper Type)
Media Load Manual Feed
XXX(Paper Size)
Load Manual Feed
YYY(Paper Type)
Media Load Tray
XXX(Paper Size)
Load Tray
YYY(Paper Type)
Media Load Manual Feed
XXX(Paper Size)
Load Manual Feed
YYY(Paper Type)
Media Press OK Button to
continue
Error Messages and Codes
Error Type
<IOT SSF Paper Staying>
Feeding from Tray fails due to
a sheet remaining in the
manual feed slot.
<IOT Regi Jam>
Media reached the
Registration Sensor earlier
than expected.
<IOT Regi Jam>
Media does not pass through
the Registration Sensor on
time.
<IOT Regi Jam>
Media does not reach the
Registration Sensor as
expected.
<IOT Exit Jam>
Media reached the Exit Sensor
earlier than expected.
<IOT Exit Jam>
Media does not pass through
the Exit Sensor on time.
<IOT Remain Exit JAM>
Media remains at Exit Sensor.
<IOT Remain Regi JAM>
Media remains at Registration
Sensor.
<IOT Paper Size Mismatch in
Tray 1>
Paper size mismatch for Tray
detected.
<IOT Paper Size Mismatch in
SSF>
Paper size mismatch for
manual feed slot detected.
<No suitable paper in Tray 1>
No media in Tray.
<No suitable paper in SSF>
No media in manual feed slot.
<No suitable paper in SSF>
No media in manual feed slot.
Go to
page 3-83
page 3-43
page 3-43
page 3-37
page 3-45
page 3-45
page 3-45
page 3-50
page 3-73
page 3-73
page 3-75
page 3-81
page 3-81
3-31