Xerox Phaser 6128MFP Service Manual page 256

Error Messages and Codes
Initial Actions
3-136
• 035-779: Fax Communications Error
• 133-231: Fax Communications Error
• 133-234: Fax Error
• 133-235: Fax Error
• 116-396: Scan Error
• 116-987: Scan Error
• 116-397: Controller Error
• 116-398: Controller Error
• 117-322: Error (SYSMGR Task Error)
• 117-328: Error (MSCAN Task Error)
• 117-335: Error (DFAX Task Error)
• 117-336: Error (Pull Task Error)
• 117-337: Error (IITTX Task Error)
• 117-340: Error (Hook Task Error)
• 117-348: Error (IITRX Task Error)
• 117-349: Error (SCANMGR Task Error)
• 117-350: Error (Task Initialize Error)
• 117-362: EEPROM Error
• Cycle printer power.
• If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board (PL10.6.6)
Troubleshooting Procedure Table
Step Actions and Questions
1 Print any files stored in memory,
then cycle system power.
Does the error persist?
2 Check the country setting: System >
Admin Menu > Fax Settings >
Country.
Is the country setting correct?
3 Reseat IIT connections on the I/P
Board, then cycle system power.
Does the error persist?
Wiring and Plug/Jack Map References
"System Control" on page 10-22
Yes No
Go to step 2. Complete.
Go to step 3. Correct the
country
setting.
Replace the I/P Complete.
Board
(page 8-41).
Phaser 6128MFP Service Manual