Feed Roller Rotation - Xerox Phaser 6128MFP Service Manual

Hide thumbs Also See for Phaser 6128MFP:

Table of Contents

Feed Roller Rotation

Phaser 6128MFP Service Manual

This test operates the Feed Solenoid and allows the Feed Roller for the Paper Tray

to turn. When (DO-b) is selected, the Feed Roller makes a half rotation; When (DO-

c) is selected, the Feed Roller makes a full-rotation.

1. Enter Service Diagnostics (page 4-4).

2. Remove the Paper Tray.

3. Perform the Tray 2 Feed Solenoid (Half) or (Init) test: Engine Diag > Motor

Test> Feed Roller (DO-b, DO-c). The rotational speed of the solenoid is DO-

To repeat either the (DO-b) or (DO-c) test, it is necessary to press the Stop

button first. However, to perform the (DO-c) test after the (DO-b) test, it is

only necessary to select the test

4. Press the Stop button to stop the Tray 1 Feed Solenoid test.

General Troubleshooting

s6128mfp-085