Scanner Calibration - Xerox Phaser 6128MFP Service Manual

Hide thumbs Also See for Phaser 6128MFP:

Table of Contents

Scanner Calibration

Phaser 6128MFP Service Manual

This process enables manual calibration of the registration adjustment value or

correction value. Use this procedure to enter the correction value when replacing

the scanner.

Note the Scanner Assembly correction values located under the assembly prior

to installing the replacement on the printer.

Index(Hex) Value(Hex)

The information in the table below is for reference only. Each scanner has its

own calibration information.

FB - GS6JW0000501, ADF - GD6JW0000501

1. Turn the printer power Off.

2. Access the Service Diagnostics menu by pressing and holding the Up and

Down Arrow buttons simultaneously and turn the printer power On.

3. The Service Mode is displayed. Select Fax/Scanner Diag and press the OK

4. Press the Up Arrow or Down Arrow button to find Scanner Maintenance.

Press the OK button.

5. Press the Up Arrow or Down Arrow button to find Parameter. Press the OK

Adjustments and Calibrations

s6128mfp-175

s6128mfp-125