Color Registration
Phaser 6128MFP Service Manual
A printed yellow or black image is not overlapped on a cyan or magenta image
correctly.
Initial Actions
•
Check the paper transfer path.
•
Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Notes
Imaging Unit (PL4.1.21)
Fuser (PL6.1.1)
Transfer Belt (PL6.1.7)
MCU Board (PL10.7.7)
Troubleshooting Procedure Table
Step
Actions and Questions
1
Cycle the printer power.
Does the mis-registration (color
shift) appear on the print?
2
Print a test page.
Is the image printed correctly?
3
Check the paper being used and its
condition.
Is the paper dry and recommended
paper?
4
Does the mis-registration (color
shift) appear on the print?
5
Open and close the Front Cover.
Does the Front Cover latch close
properly?
Print-Quality Troubleshooting
Example Print
Color Registration
Yes
No
Go to step 2.
Complete
Check the
Go to step 3.
printing data
for errors.
Go to step 5.
Replace with
dry, approved
paper, then go
to step 4.
Go to step 5.
Complete
Complete
Replace any
defective parts,
then go to step
6.
5-39