Breaker Chassis - Xerox Phaser 6128MFP Service Manual

Service Parts Disassembly

Breaker Chassis

PL 10.5.8
8-64
14. Remove 1 screw (silver, tap, 8mm) that secures the right edge of the Duct
Plate at the front.
15. Remove 2 screws (silver, M4, 6mm) that secure the left edge of the Duct Plate
at the back.
16. Remove 1 screw (silver, M4, 6mm) that secures the Duct Plate near the MCU
Board and remove the Duct Plate.
1. Open the Front Cover.
2. Remove the Left Side Cover (page 8-17).
3. Remove the Outer Pole Cover (page 8-19).
4. Remove the Rear Cover (page 8-22).
5. Remove the Right Side Cover (page 8-23).
6. Remove the Top Cover (page 8-25).
7. Remove the Lower Scanner Cover (page 8-26).
8. Remove the ESS Shield (page 8-46).
9. Remove the Inner Pole Cover (page 8-20).
10. Remove the LVPS Card Cage (page 8-66).
11. Remove the Duct Plate (page 8-62).
s6128mfp-237
Phaser 6128MFP Service Manual