Xerox Phaser 6128MFP Service Manual page 462

Service Parts Disassembly
8-38
10. Disconnect P/J24 and P/J26 on the MCU Board.
11. Release the harnesses from the locking clamp and pull the harness out from
the hole in the chassis.
12. Remove the three screws (one silver, M4, 6mm; one silver, M3, 6mm; one silver,
tap, 8mm) that attach the Feed Drive Assembly to the printer.
6mm
M4
Tap, 8mm
Note
When performing the next step, make sure the coupling gear remains on
the shaft of the Feed Drive Assembly. Take care not to drop the gear.
P/J24
P/J26
s6128mfp-316
s6128mfp-154
Phaser 6128MFP Service Manual
6mm
M3