Xerox Phaser 6128MFP Service Manual page 321

Phaser 6128MFP Service Manual
Drum Erase Lamp (C, M, Y)
Note
Install the safety interlock override to provide power to the device under test.
1. Enter Service Diagnostics (page 4-4).
2. Open the Front Cover.
3. Remove the Imaging Unit (page 8-8).
4. Perform the Drum Erase Lamp YMC test: Engine Diag > Motor Test > Drum
Erase Lamp YMC (DO-3f).
5. Verify that the Lamps are operating.
7. Press the Stop button to stop the Drum Erase Lamp YMC test.
General Troubleshooting
s6128mfp-091
4-51