Xerox Phaser 6128MFP Service Manual page 150

Error Messages and Codes
3-30
Error Message Summary (continued)
System Error Message
IIT Memory Full
Error 062-324
Job too Large
Press OK Button
IIT Scanner Sensor Error
Error 062-360
Restart Printer
IIT Scanner Lamp Error
Error 062-371
Restart Printer
IIT Scanner Error
Error 062-393
Restart Printer
Jam Jam at Tray
Check Tray
Open Front Cover
Jam Insert Output to Tray
Jam Press OK Button to
continue
Jam Jam at Manual Feed
Slot
Chk Manual Feed
Open Front Cover
Jam Jam at Front Cover
Open Front Cover and
Remove Paper
Jam Chk Manual Feed
Remove Paper
Open and close Front
Cover
Jam Insert Output to
Manual Feed
Jam Press OK Button to
continue
Jam Remove paper from
Manual Feed
Error Type
<IIT Memory Over Flow>
The amount of scanning data
exceeded memory capacity.
<HP Sensor Error>
Scanner Home Position error.
<IIT Lamp Error>
The IIT Lamp error occurred.
<CCD ASIC Error>
The CCD ASIC communication
error occurred.
<IOT Tray 1 Misfeed JAM>
Registration Sensor is not
turned ON within the specified
time after feeding from Tray.
<IOT Side 2 No paper>
Media was not reloaded in
Tray for duplex printing.
<IOT Side 2 No paper>
Media was not reloaded in
Tray for duplex printing.
<IOT SSF Misfeed JAM>
Registration Sensor is not
turned ON within the specified
time after feeding from
manual feed slot
<IOT SSF Insert JAM>
Manual feed No Paper Sensor
detected when media inserted
into manual feed slot.
<IOT SSF Paper Pullout JAM>
Attempted feed rom manual
feed slot. Media was not
loaded or was pulled out.
<IOT Side 2 No paper>
Media was not reloaded into
the manual feed slot for
duplex printing.
<IOT Side 2 No paper>
Media was not reloaded into
manual feed slot for duplex
printing.
<IOT SSF No Paper>
Waiting for reseat media in
manual feed slot.
Phaser 6128MFP Service Manual
Go to
page 3-128
page 3-132
page 3-132
page 3-129
page 3-37
page 3-77
page 3-77
page 3-47
page 3-41
page 3-47
page 3-80
page 3-80
page 3-81