Dispense Assembly - Xerox Phaser 6128MFP Service Manual

Dispense Assembly

PL 5.1.1
Phaser 6128MFP Service Manual
15. Press the boss part of the Toner Cartridge Holder, remove the Toner Cartridge
Holder from the printer.
1. Open the Front Cover.
2. Remove the Left Side Cover (page 8-17).
3. Remove the Outer Pole Cover (page 8-19).
4. Remove the Rear Cover (page 8-22).
5. Remove the Right Side Cover (page 8-23).
6. Remove the Top Cover (page 8-25).
7. Remove the Lower Scanner Cover (page 8-26).
8. Remove the ESS Shield (page 8-46).
9. Remove the Inner Pole Cover (page 8-20).
10. Remove the LVPS Card Cage (page 8-66).
11. Remove the Duct Plate (page 8-62).
12. Remove the Breaker Chassis (page 8-64).
13. Remove the Toner Cartridge Holders (page 8-90).
14. Release the hooks of the LVPS Main Harness connector (P5041), using needle
nose pliers, to remove it from the Dispense Assembly.
Service Parts Disassembly
s6128mfp-291
8-91