Xerox Phaser 6128MFP Service Manual page 382

Print-Quality Troubleshooting
5-36
Troubleshooting Procedure Table (continued)
Step Actions and Questions
6 Reseat the Fuser.
Is the image printed correctly?
7 Open and close the Front Cover to
reseat the Transfer Belt.
Is the image printed correctly?
8 Is the paper damaged when fed
from the manual feed slot?
9 Check the setting of the manual
feed slot side guides and reset the
side guides if needed.
Is the image printed correctly?
10 Inspect the media path.
Is there any contamination?
11 Is the image printed correctly?
12 Reseat the Paper Tray.
Is the image printed correctly?
13 Reset the Paper Tray side guides.
Is the image printed correctly?
14 Replace the media in the Paper Tray.
Is the image printed correctly?
15 Inspect the media path.
Is there any contamination?
16 Is the image printed correctly?
17
Reseat the Separator Roller.
Is the image printed correctly?
18 Replace the Separator Roller
(page 8-7).
Is the image printed correctly?
19 Replace the Feed Roller (page 8-10).
Is the image printed correctly?
Yes No
Complete Go to step 7.
Complete Go to step 8.
Go to step 9. Go to step 12.
Complete Go to step 10.
Clean the Go to step 12.
paper path
(refer to
"Cleaning" on
page 7-2), then
go to step 11.
Complete Go to step 12.
Complete Go to step 13.
Complete Go to step 14.
Complete Go to step 15.
Clean the Go to step 17.
paper path
(refer to
"Cleaning" on
page 7-2), then
go to step 16.
Complete Go to step 17.
Complete Go to step 18.
Complete Go to step 19.
Complete Go to step 20.
Phaser 6128MFP Service Manual