Xerox Phaser 6128MFP Service Manual page 300

General Troubleshooting
4-30
Test Control Panel Display
Copy Counter OK?
MtoB
Processing
Copied
Copy Counter OK?
BtoM Processing
Copied
Clear All NVM OK?
Processing
Initialized
Clear Job OK?
History Processing
Initialized
Clear
Auditron PV
Test Print Test prints for troubleshooting the printer. See Chapter 5 for
examples and descriptions of test prints.
No Image IOT Ready
Processing
Pattern IOT Ready
Processing
Grid 2 Ready
Processing
Cyan 20% Ready
Processing
Magenta 20% Ready
Processing
Yellow 20% Ready
Processing
Black 20% Ready
Processing
CMY 20% Ready
Processing
Gradation Ready
Processing
Toner Pallet Toner Pallet Check
Check
Test Description
Copies the values from Master NVM
to Backup NVM on the Controller
Board.
Device-specific information called
"Personal info" in the first 128 Byte
PV counter master
Printer counter master
Copies the values from Backup NVM
to Master NVM on the Controller
Board.
Device-specific information called
"Personal info" in the first 128 Byte
PV counter backup
Printer counter backup
Clears all Controller Board NVM of
the Controller.
Deletes the job history data from
Controller Board NVM.
Clears print volume (PV) or Print
Auditron values.
Prints a blank page.
Prints the Engine Test print at 600
DPI. This page isolates the print
engine (IOT) from the I/P Board.
Prints a built-in grid pattern. This
print isolates ESS function.
Prints 20% density pattern of cyan.
Prints 20% density pattern of
magenta.
Prints 20% density pattern of yellow.
Prints 20% density pattern of black .
Prints 20% density pattern of cyan,
magenta, and black combined.
Prints a pattern in which the density
of each cyan, magenta, yellow, or
black is varied from 0-100%.
Prints a pattern of 100% density of
each color.
Phaser 6128MFP Service Manual