Limit Exceeded Error
Phaser 6128MFP Service Manual
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL10.6.6
Troubleshooting Procedure Table
Step
Actions and Questions
1
Check network connections.
Is the system connected to the
network?
2
Reseat the Image Processor Board
connections.
Cycle system power.
Does the error persist?
User count exceeds the User Registration count. This troubleshooting procedure
applies to this error.
Applicable Error
•
016-759: Limit Exceeded Error
Initial Actions
•
Check the print driver version.
•
Cycle printer power.
•
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL10.6.6
Error Messages and Codes
Wiring and Plug/Jack Map References
"Map 3 - Electrical and Drive" on page 10-8
Yes
Go to step 2.
Replace the I/P
Board
(page 8-41).
Wiring and Plug/Jack Map References
"Map 3 - Electrical and Drive" on page 10-8
No
Connect the
network.
Complete.
3-87