Mounting Surface Specifications - Xerox Phaser 6128MFP Service Manual

Mounting Surface Specifications

Phaser 6128MFP Service Manual
These specifications apply to any printer used as a table-top printer.
Mounting surface flatness must be within the specified range. The printer must
not be tipped or tilted more than 10 degrees or 7 mm.
10°
10°
Known problems that occur as a result of exceeding the mounting surface
specifications are:
• Color-to-Color mis-registration, primarily in the horizontal (laser scan)
direction.
• A smear or line of toner approximately 40 mm from the trailing edge of the
print.
General Information
10°
10°
s6128mfp-132
21