Damaged Media - Xerox Phaser 6128MFP Service Manual

Damaged Media

Phaser 6128MFP Service Manual
Paper comes out from the printer wrinkled, folded, or worn-out.
Initial Actions
• Check the paper transfer path.
• Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Notes
Separator Roller Assembly
(PL2.1.5)
Feed Roller Assembly (PL3.2.4)
Registration Roller Assembly
(PL3.2.9)
Metal Registration Roller
(PL3.2.10)
Note
The Tray is recommended for media feeding. Media fed through the Manual
Feed is prone to skew depending on how the sheet is inserted.
Warning
Allow the Fuser to cool before starting the procedure.
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the paper condition
Is the paper dry and approved for
use?
2 Is the image printed correctly?
3 Open and close the Front Cover.
Does the Front Cover latch close
properly?
4 Is the image printed correctly?
5 Reseat the Imaging Unit.
Is the image printed correctly?
Print-Quality Troubleshooting
Example Print
Damaged Print Media
Yes No
Go to step 3. Replace with
dry, approved
paper, then go
to step 2.
Complete Go to step 3.
Complete Replace any
defective parts,
then go to step
4.
Complete Go to step 5.
Complete Go to step 6.
5-35