Acquity Xevo Tqd Uplc/Ms Systems - Waters Xevo TQD Overview And Maintenance Manual

1 Specifications and Operating Modes
The IntelliStart Fluidics
sample directly to the MS probe from the LC column or from two integral
reservoirs. The integral reservoirs can also deliver sample through direct or
combined infusion so that you can optimize instrument performance at
analytical flow rates. See the instrument's online Help for further details of
IntelliStart.

ACQUITY Xevo TQD UPLC/MS systems

The Waters Xevo TQD is compatible with the following ACQUITY UPLC
systems:
• ACQUITY UPLC
• ACQUITY UPLC H-Class
• ACQUITY UPLC I-Class
• nanoACQUITY UPLC
If you are not using one of these systems, refer to the documentation relevant
to your LC system.
The ACQUITY
ACQUITY UPLC H-Class, or ACQUITY UPLC I-Class system, and the
Waters Xevo TQD fitted with the ESI/APCI/ESCi source.
The nanoACQUITY
UPLC system and the Xevo TQD fitted with either a Nanoflow source, or a
TRIZAIC source.
If you are not using your instrument as part of an ACQUITY UPLC system,
refer to the documentation for your LC system.
ACQUITY system options can vary depending on the software used to
Note:
operate the Xevo TQD.
1. In Waters product documentation, the term "fluidics" denotes plumbing
connections and components and the fluid pathways within and among
instruments or devices. It also appears in the product name "IntelliStart™
Fluidics" where it describes a mass spectrometer's integral apparatus for
delivering sample and solvent directly to the instrument's probe. Finally, the
term can arise in the context of a component part name, as in "fluidics
drawer".
26 March 14, 2014, 715004387 Rev. B
1
system is built into the instrument. It delivers
®
(with Nanoflow or TRIZAIC source)
®
Xevo TQD UPLC/MS system includes an ACQUITY UPLC,
®
Xevo TQD UPLC/MS system includes a nanoACQUITY
®