Connecting To The Nitrogen Gas Supply - Waters Xevo TQ MS Operator's, Overview And Maintenance Manual

Connecting to the nitrogen gas supply

Required materials
• Chemical-resistant, powder-free gloves
• 6-mm PTFE tubing (included in the Waters Rough Pump Connect Kit)
• Nitrogen regulator
To connect the nitrogen gas supply:
1. Connect one end of the 6-mm PTFE tubing to the nitrogen inlet port on
the rear of the instrument.
Nitrogen and collision cell gas inlet, and vacuum connectors:
Collision cell gas inlet
2. Attach a nitrogen regulator (not provided) to the nitrogen supply.
Turbo vacuum
Pilot valve port
Nitrogen inlet port
February 11, 2013, 71500130002 Rev. D

Connecting to the nitrogen gas supply

External Connections 1
10 9 8 7 6
OUT -
External Connections 2
10 9 8 7 6
OUT - OUT
Source vacuum
Nitrogen exhaust
LA N
5 4 3 2 1
Service Bus
IN IN
EPC Com Port
5 4 3 2 1
Video Output
OUT OUT
10 1
External Connections 1
10 1
External Connections 2
Auxiliary
10MB
Activity
/100MB
TP03118
229