Waters Xevo TQ MS Operator's, Overview And Maintenance Manual page 23

Waters Xevo TQ MS:
T Q T Q
M S M S
IntelliStart technology
IntelliStart™ technology monitors LC/MS/MS performance and reports when
the mass spectrometer is ready for use.
The software automatically tunes and mass calibrates the mass spectrometer,
displays performance readbacks, and enables simplified setup of the system
for use in routine analytical and open access applications. (See
The IntelliStart Fluidics system is built into the mass spectrometer. It
delivers sample directly to the MS probe from the LC column or from three
integral reservoirs. The integral reservoirs can also deliver sample through
direct or combined infusion so that you can optimize instrument performance
at analytical flow rates.
Recommendation:
tuning compounds, and reservoir C for analyte/optimization solution.
A fourth reservoir contains solvent for automated flushing of the solvent
delivery system.
See the mass spectrometer's online Help for further details on IntelliStart
technology.
Use reservoir A for the calibrant solution, reservoir B for
February 11, 2013, 71500130002 Rev. D
Waters Xevo TQ MS
page 26.)
23