Waters Xevo TQ MS Operator's, Overview And Maintenance Manual page 235

Warning:
materials, ensure that the,
• drain line does not crimp or bend, impeding flow to the
waste container;
• waste container is emptied before the lower end of the
drain tube is covered by waste solvent.
3. Route the waste line to the waste container. If necessary, shorten the
waste tube so that its end is above the surface of the waste solvent.
Positioning of drain tube:
Correct
To prevent leakage of biohazards or toxic
Incorrect
TP01807
February 11, 2013, 71500130002 Rev. D
Connecting the liquid waste line
235