Installing An Infrared Sensor - Huawei IDS2000 Installation Manual

IDS2000 Intelligent Micro-Modular Data Center
Installation Guide (2000 mm High Cabinet in Dual-Row
Aisle Containment)
Context


Procedure
Step 1 Secure the smoke sensor base to appropriate holes in the control skylight using M3x10 screws,
as shown by (1) in
Figure 4-158 Installing a smoke sensor
Step 2 Align the mounting holes in the smoke sensor with holes in the smoke sensor base, and then
rotate the smoke sensor until it is secured, as shown by (2) and (3) in
----End

4.11.10.3 Installing an Infrared Sensor

Prerequisites


Context



Procedure
Step 1 Secure the infrared sensor base to the control skylight by using M3x10 bolts, as shown by (1)
in Figure
Issue Draft A (2015-06-29)
The screws for installing a smoke sensor are located in the fittings bag of the supporting
object. For example, the screws for installing a smoke sensor on the control skylight are
located in the fittings bag of the control skylight.
Prior to installing the smoke sensor, properly install related cables to avoid removing it
from time to time.
Figure 4-158.
The object to carry the infrared sensor has been installed.
An infrared sensor and tools for installing it have been prepared.
The screws for installing an infrared sensor are located in the fittings bag of the
supporting object. For example, the screws for installing an infrared sensor on the
control skylight are located in the fittings bag of the control skylight.
Install one infrared sensor on each control skylight. If there are extra infrared sensors,
keep them as spare parts.
Prior to installing the infrared sensor, properly install related cables to avoid removing it
from time to time.
4-159.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation
Figure 4-158.
130