Huawei IDS2000 Installation Manual page 168

IDS2000 Intelligent Micro-Modular Data Center
Installation Guide (2000 mm High Cabinet in Dual-Row
Aisle Containment)
Context
Bind the SMS modem to the rack mounting bar at the rear of the network cabling cabinet near
the server using cable ties.
Figure 4-197
Figure 4-197 Ports on the SMS modem
(1) Connecting to the SIM card
(3) Connecting to the power cable
Procedure
Step 1 Insert a SIM card into the SMS modem.
Use a tool such as the small screwdriver to press the yellow key. Put the SIM card on the
ejected tray, and insert the tray into the SMS modem.
Step 2 Connect the antenna to the antenna connector.
Step 3 Connect the serial port cable.
One end of the cable connects the SMS modem and the other end connects an idle serial port
on the server, serial port on the server see
Step 4 Connect the power cable.
Use the power adapter with the SMS modem.


After the power cable is connected, switch on the power. Normally, the indicator of the SMS
modem blinks regularly.
SMS modem.
Issue Draft A (2015-06-29)
shows the ports on the SMS modem.
For details, see the user manual delivered with the SMS modem.
Use the connector convertor delivered with the SMS modem if the connector of the serial cable does not
match the serial port on the server.
Connect one end of the power adapter to the SMS modem, for details, see the
specifications delivered with the SMS modem.
Connect the other end of the power adapter to the 220V power.
Table 4-12
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) Connecting to the antenna
(4) Serial port
4.12.12.2 Connecting the Server Monitoring
shows how the indicator indicates the work status of the
4 Hardware Installation
Cable.
160