Connecting The Lan Switch Monitoring Cable - Huawei IDS2000 Installation Manual

IDS2000 Intelligent Micro-Modular Data Center
Installation Guide (2000 mm High Cabinet in Dual-Row
Aisle Containment)
Table 4-12 Relations between the status of the indicator and the SMS modem
Indicator
On
Blinks slowly
Blinks quickly
Off
Step 5 Install the SMS modem driver.
To install the SMS modem driver, see the specifications delivered with the SMS modem.
----End

4.12.12.4 Connecting the LAN Switch Monitoring Cable

Procedure
Step 1 Connect cables to a LAN switch, as illustrated in
switch with eight ports is used as an example.
Figure 4-198 Installing LAN switch cables
Table 4-13 Description of LAN switch cables
No.
1
2
----End
Issue Draft A (2015-06-29)
You need to install the driver only when the installation of the driver is required in the specifications
delivered with the SMS modem.
Port Description
Connects to the server, collector, camera, and access controller
Port for large throughput (connecting to the Internet)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Modem
The SMS modem is activated and is not registered with
the network.
The SMS modem is connected to the network and is in
idle mode.
The SMS modem is in transmission mode.
The SMS modem is deactivated.
Figure 4-198
4 Hardware Installation
and Table 4-13. The LAN
161