IDS2000 Intelligent Micro-Modular Data Center
Installation Guide (2000 mm High Cabinet in Dual-Row
Aisle Containment)
2.
Figure 4-124 Installing mounting ears
Step 4 Install the access control component mounting plate onto the mounting brackets and tighten
the two M6 panel screws on both sides, as shown in
Issue Draft A (2015-06-29)
Install a floating nut into each front mounting bar.
Select an appropriate installation position in the network cabling cabinet for the access controller.
Ensure that the two mounting brackets are flush with each other.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation
Figure
4-125.
108