Table of Contents
Advertisement
IDS2000 Intelligent Micro-Modular Data Center
Installation Guide (2000 mm High Cabinet in Dual-Row
Aisle Containment)
Step 2 Connect one end of the network cable from the Ethernet port in the camera and route the other
end out of the camera.
Step 3 Align the hole in the dome camera base with the specified hole in the control skylight and
secure the camera to the control skylight using screws, as shown in
Figure 4-153 Installing the camera base
This camera model provides triple-axis adjustment design. Connect the auxiliary video cable delivered
with the camera to a display device such as the monitor. Rotate the camera 0–355 degrees horizontally,
0–75 degrees vertically, or 0-355 degrees in the revolving direction to achieve an appropriate angle.
Figure 4-154
Issue Draft A (2015-06-29)
Figure 4-152 Installing an SD card
shows the adjustment methods.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation
Figure
4-153.
127
Advertisement
Table of Contents
