Using The Event Function; Displaying Messages (Event Display Function (Settable Only In Yss1000)) - YOKOGAWA YS1000 Series User Manual

1.6

Using the Event Function

1.6.1 Displaying Messages (Event Display Function (Settable Only in
YSS1000))
Description
IM 01B08D02-02EN
The event display function displays a message (in Japanese, English, or Chinese) on the
Operation Display if an event such as an abnormality occurs, providing guidance for the
operator. A maximum of five events can be set using the YSS1000 Setting Software (sold
separately). Events will be displayed on all Operation Displays. The display area is 200 ×
80 dots, with 50 × 80 dots of that used to display a clearing guide.
If multiple events occur simultaneously, they are displayed in an overlaid condition. The
order of priority is (high) event 1 > 2 > 3 > 4 > 5 (low), and the event with the highest
priority is displayed on top. The event being displayed can be cleared by pressing and
holding the SHIFT key for three seconds. Moreover, events can be redisplayed on Alarm
Display.
► For how to redisplay events: see "Monitoring and Operating the Alarm Display" in the YS1310
Indicator with Alarm Operation Guide.
Press and hold
the SHIFT key
for three
seconds
Events are overlaid for
display if multiple events
occur simultaneously.
Set using the YSS1000
Setting Software
Clearing guide display
Only foreground event is cleared.
Press and hold
the SHIFT key
(fixed display)
for three
seconds
0102E.ai
1
1-7