General Information; Cutting Unit Operator's Manual; Supporting The Cutting Unit When Servicing - Toro Greensmaster 3120 Service Manual

General Information

Cutting Unit Operator's Manual

Supporting the Cutting Unit when Servicing

DPA Cutting Units: General Information
The Cutting Unit Operator's Manual provides information regarding the operation,
general maintenance, and maintenance intervals for the cutting units on your
machine. Additionally, if optional kits have been installed on the cutting units
(e.g. groomer or rear roller brush), the Installation Instructions for the kit includes
set-up, operation and maintenance information. Refer to the Cutting Unit
Operator's Manual and the kit Installation Instructions for additional information
when servicing the cutting units.
g225404
1. Bedbar adjuster screws
Whenever the cutting unit has to be tipped to expose the bedknife or cutting reel,
support the rear of the cutting unit making sure the back of the bedbar adjuster
screws are not resting on the work surface.
Figure 105
2. Support
Page 7–4 Greensmaster 3120
17230SL Rev C