General Information
Cutting Unit Operator's Manual
Supporting the Cutting Unit when Servicing
DPA Cutting Units: General Information
The Cutting Unit Operator's Manual provides information regarding the operation,
general maintenance, and maintenance intervals for the cutting units on your
machine. Additionally, if optional kits have been installed on the cutting units (e.g.
groomer), the Installation Instructions for the kit includes set-up, operation and
maintenance information. Refer to the Cutting Unit Operator's Manual and the kit
Installation Instructions for additional information when servicing the cutting units.
g311262
1.
Support
Whenever the cutting unit has to be tipped to expose the bedknife or cutting reel,
support the rear of the cutting unit making sure the back of the bedbar adjuster
screws are not resting on the work surface.
Figure 96
2.
Bedbar adjuster screw nuts
Page 7–2
Greensmaster
®
eFlex 1021
20248SL Rev A