Table of Contents
Advertisement
Sorting Based on Measured Result (Comparator Function)
Setting Up Comparator Function
Turning ON/OFF AUX BIN function
To turn ON/OFF the AUX BIN function, use the following command.
•
Depending on the ON/OFF state of the AUX BIN function, the sorting result when the
value of the secondary parameter exceeds the limit range varies as shown in
Table 7-1
Sorting result when measured secondary parameter value exceeds limit range
Setting up condition to make a beep sound
You can select the condition that produces a beep sound based on the comparator sorting
judgment result from the following:
•
•
To set the condition that makes a beep sound, use the following command.
•
You can also disable the beep sound. To turn ON/OFF the beep, use either of the following
commands (they have the same function).
•
•
80
:CALCulate1:COMParator:AUXBin on page 175
Primary parameter sorting result
One of BIN1 to BIN9
Not sorted to any BIN
Beep when the sorting judgment result is OUT_OF_BINS or AUX_BIN
Beep when the sorting judgment result is BIN1 to BIN9
:CALCulate1:COMParator:BEEPer:CONDition on page 175
:CALCulate1:COMParator:BEEPer[:STATe] on page 176
:SYSTem:BEEPer:STATe on page 269
AUX BIN function
OFF
ON
Not applicable
Table
7-1.
Sorting result
OUT_OF_BINS
AUX_BIN
OUT_OF_BINS
Chapter 7
Advertisement
Table of Contents
