Keysight Technologies E4980A Configuration Manual
Precision lcr meter
Hide thumbs
Also See for E4980A:
- Modification recommended service note (2 pages) ,
- Quick demo manual (2 pages)
Related Manuals for Keysight Technologies E4980A
Summary of Contents for Keysight Technologies E4980A
- Page 1 Keysight Technologies E4980A Precision LCR Meter 20 Hz to 2 MHz E4980AL Precision LCR Meter 20 Hz to 300 kHz/500 kHz/1 MHz Configuration Guide...
- Page 2 Attaches blank panel to the expansion slots Notes: Up to 2 interfaces can be installed in the expansion slots on the rear panel. When no interface is added, two of the E4980A-710 are installed. When one interface is added, that interface and the E4980A-710 are installed.
- Page 3 03 | Keysight | E4980A/E4980AL Precision LCR Meters - Configuration Guide E4980A Ordering Guide (continued) Step 2. Choose Software Option (If not required, go to Step 3) Description Option No. Additional Information Power and DC Bias E4980A-001 Increases test signal level range to 20 V/100 mA rms max. Adds internal DC bias function controllable Enhancement from 0 ±...
-
Page 4: Hardware Upgrade
1. The E4980A-001 and E4980A-002 can be installed in the same unit but cannot be operated simultaneously. 2. The DCR (Rdc) measurement becomes available with either E4980A-200 or E4980A-001. It is unnecessary to upgrade if the unit has the E4980A-001. -
Page 5: Available Accessories
05 | Keysight | E4980A/E4980AL Precision LCR Meters - Configuration Guide Available Accessories – General Measurement Accessories Description Model Number Additional Information SMD Test Fixture 16034E For SMD; (0.1 to 8)L x (0.5 to 10)W x (0.5 to 10)H mm. - Page 6 06 | Keysight | E4980A/E4980AL Precision LCR Meters - Configuration Guide Available Accessories – for Calibration and Maintenance Description Model Number Additional Information Open Termination 42090A 4-terminal pair Open termination. Needed for performing calibration. Short Termination 42091A 4-terminal pair Short termination. Needed for performing calibration.
- Page 7 07 | Keysight | E4980A/E4980AL Precision LCR Meters - Configuration Guide E4980AL Ordering Guide The following steps will guide you through configuring your E4980AL. Standard Furnished Item Description Additional Information CD-ROM Contains User’s Guide (in PDF) and Sample Program. See documentation option for printed manuals.
-
Page 8: Hardware Upgrades
08 | Keysight | E4980A/E4980AL Precision LCR Meters - Configuration Guide Hardware Upgrades When the model number on the front panel is labeled E4980AL: Upgrade Model No. or Description Option number to add Customer Additional Information Equivalent Part Number Installable... -
Page 9: Software Upgrades
Can run on an external PC. Up to 120 MHz Transportable with dongle key. Accessory See Available Accessories - General Measurement Accessories on Page 5. These accessories are common to both E4980A and E4980AL. Description Model Number Requires (Instrument must already... - Page 10 10 | Keysight | E4980A/E4980AL Precision LCR Meters - Configuration Guide Evolving Since 1939 For more information on Keysight Technologies’ products, applications or Our unique combination of hardware, software, services, and people can help you services, please contact your local Keysight reach your next breakthrough.