Table of Contents
Advertisement
User Interface Reference
The LCA Function Keys
58
1 If it is not already running, start the LCA server by pressing
, or by clicking the LCA server icon on the
desktop.loading the LCA macros.
a Press the "Macro Setup" button on the front panel of the
network analyzer.
b Select
c Select
d Select
e Press the [Macro Setup] key on the front panel of the
network analyzer.
f Select
•
: Brings the LCA user interface to the
foreground, to setup an LCA measurement.
•
: Perform a single sweep measurement
with the current measurement setup.
Pressing this function key when a single or
continuous measurement is running, stops this
measurement and starts a new, single sweep measurement.
•
: Perform continuous measurement sweeps with the
current measurement setup.
Pressing this function key during a single or continuous
measurement, stops the measurement.
•
: Start the optical power monitor. This uses the
current measurement setup to determine the wavelength and
the optical input for which the average optical power is
measured.
•
: If it is not already running, this starts the LCA
server. If it is already running, it brings the server to the
foreground.
For information on further function keys, please refer to the
documentation supplied with the network analyzer.
Keysight N4374B Lightwave Component Analyzer, User's Guide
.
.
.
.
Advertisement
Table of Contents
