[:Sense]:Correction:offset[:State] - Keysight Technologies E4981A Programming Manual

[:SENSe]:CORRection:OFFSet[:STATe]

[:SENSe]:CORRection:OFFSet[:STATe] {ON|OFF|1|0}
Syntax
[:SENSe]:CORRection:OFFSet[:STATe]?
Description Turns ON/OFF the offset correction function.
NOTE
Changing any of the measurement parameter will automatically turn off this function. To
avoid this, you have to write a program so that this command is executed after the
execution of the measurement parameter setup command
:CALCulate2:FORMat).
Parameters
ON or 1
OFF or 0 (initial value)
Query response {1|0}<newline><^END>
Related commands [:SENSe]:CORRection:OFFSet:DATA on page 242
:CALCulate1:FORMat on page 188
:CALCulate2:FORMat on page 191
Equivalent key [
Meas Setup
sequence
Chapter 10
Turns ON the offset correction function.
Turns OFF the offset correction function.
] - CORRECTION - OFFSET -ON|OFF
Command Reference
E4981A SCPI Commands
(:CALCulate1:FORMat and
Description
243