[:Sense][:Fimpedance]:Range:auto - Keysight Technologies E4981A Programming Manual

[:SENSe][:FIMPedance]:RANGe:AUTO

[:SENSe][:FIMPedance]:RANGe:AUTO {ON|OFF|1|0}
Syntax
[:SENSe][:FIMPedance]:RANGe:AUTO?
Description Selects the measurement range mode from the auto range (automatic range switching) or
hold range (fixed range).
Setting the measurement range (set with the
command) automatically selects the hold range mode.
Parameters
ON or 1 (initial value)
OFF or 0
Query response {1|0}<newline><^END>
Related commands [:SENSe][:FIMPedance]:RANGe[:UPPer] on page 262
Equivalent key [
Meas Setup
sequence
Chapter 10
Specifies the auto range mode.
Specifies the hold range mode.
] - RANGE - AUTO|HOLD
Command Reference
E4981A SCPI Commands
[:SENSe][:FIMPedance]:RANGe[:UPPer]
Description
261