Calculate1:Math:state - Keysight Technologies E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:CALCulate1:MATH:STATe

Syntax :CALCulate1:MATH:STATe {ON|OFF|1|0}
:CALCulate1:MATH:STATe?
Description Determines whether to use the function (deviation measurement mode) that displays the
primary parameter measurement result in deviation from the reference value (set using the
:DATA[:DATA]
NOTE Changing any of the measurement parameters will automatically disable this function. To
avoid this, you have to write a program so that this command is executed after the
execution of the measurement parameter setup command
:CALCulate2:FORMat).
Parameters
ON or 1
OFF or 0 (initial value)
Query response {1|0}<newline><^END>
Related commands :CALCulate1:MATH:EXPRession:NAME on page 189
:CALCulate1:FORMat on page 188
:CALCulate2:FORMat on page 191
:CALCulate2:MATH:STATe on page 193
Equivalent key [
Meas Setup
sequence
190
command).
Enables the deviation measurement mode.
Disables the deviation measurement mode (in other
words, displays the measurement result in an absolute
value).
] - DEV A - OFF
(:CALCulate1:FORMat
Description
Chapter 10
and