Calculate2:Math:expression:name - Keysight Technologies E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:CALCulate2:MATH:EXPRession:NAME

Syntax :CALCulate2:MATH:EXPRession:NAME {DEV|PCNT}
:CALCulate2:MATH:EXPRession:NAME?
Description Specifies the expression of the secondary parameter used when displaying the
measurement result in the deviation measurement mode.
Parameters
DEV
(initial value)
PCNT
Query response {DEV|PCNT}<newline><^END>
Related commands :CALCulate2:MATH:STATe on page 193
:CALCulate1:MATH:EXPRession:NAME on page 189
:DATA[:DATA] on page 206
Equivalent key [
Meas Setup
sequence
192
Displays the result as the difference between the measurement
value and the reference value
value).
Displays the difference between the measurement value and the
reference value
*1.Use the :DATA[:DATA] command to set the reference value.
*2.(Measurement value - reference value) / reference value∞100
] - DEV B - delta ABS|delta %
Description
*1
(measurement value - reference
*1 *2
as a percentage of the reference value.
Chapter 10